RJ45-RJ11 Multi-Functional Network Ethernet LAN Cable Tester Test Tool Equipment

Model: A248447
SKU: SR4JK74-1-1-1
599.00 249.00
In Stock
[ti_wishlists_addtowishlist]Compare
2-day Delivery
Speedy and reliable parcel delivery!
Other people want this. 1 people have this in their carts right now.
SKU: SR4JK74-1-1-1 Category:

Quickly and easily checks network cables

Checks open and short terminals, straight through or crossover wiring types

Ideal for IT enthusiasts who wish to make their own network cables

Description

Following are abnormal connections

  • If one cable, for example, cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.

 

  • If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.

 

  • If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester:

 

1-4-3-2-5-6-7-8-G

  • If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged.

 

  • If three cables, including three, are short circuited, none of the corresponding lights is on.

 

  • If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.

The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led's to show you exactly which wire is open or miss-wire on both remote and master unit. Old version has 4 Led's. Master and Remote unit are both included. Automatic scan mode, Rapidly Testing. Power switch is not a push button will not easily turn on and waste battery." "Test the correct pin configuration of 10/100 Base-T 10Basc-2 Thin Ethernet cable Easy to verify cable continuity, open, short and miss-wire With remote kit, it can remotely test cable up to 1000 ft in length either on wall plate or patch panel. Can test the grounding. Auto scan with 2 speeds for pin-out Indicators. A power switch is provided for saving Battery Power. 9 Volt Battery

Lan Tester for cables with RJ45/RJ11/RJ12 Connector connection.

Cable Tester for RJ45 Network Cable & RJ11 RJ12 Telephone cable

  • Test RJ11/RJ12/RJ45cables.
  • Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8, and Ground.
  • Can judge wrong connection, short circuit, and open circuit.
  • Put cables into both the main tester and remote tester.
  • The lights of the main tester will turn on sequentially from 1 to G.
  • Detachable remote tester, test remote cable up to 1000ft. in length.

 

  • Cable Tester for RJ12, RJ11, RJ45, Cat 5e, Cat 5, Cat 6, 10/100 Base-T, AT&T 258 A, TIA-568A/568B etc.
  • Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground.
  • Quickly and easily checks network cables
  • Operates from a single 9V PP3 battery (not supplied)
Error Free Operation

Error Free Operation

 

  • Complete error-free operation with DC detecting anode and cathode determination, ringing signal detecting open, short, and cross circuit testing.

 

Durable and Sturdy

Durable and Sturdy

 

  • The outer shell of our network cable tester is made of high-quality resin, which has drop resistance and durability. We change newly-created lighting emitting diodes from the traditional LED for manufacturing a host of RJ45 RJ11 cable testers, which is conducive to distinguish clearly and quickly positions of wrongly-configured wires.

 

1

2

3

Following are abnormal connections

  • If one cable, for example, cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.

 

  • If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.

 

  • If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester:

 

1-4-3-2-5-6-7-8-G

  • If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged.

 

  • If three cables, including three, are short circuited, none of the corresponding lights is on.

 

  • If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
RJ45-RJ11 Multi-Functional Network Ethernet LAN Cable Tester Test Tool Equipment 249.00
In Stock
[ti_wishlists_addtowishlist]Compare
2-day Delivery
Speedy and reliable parcel delivery!
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare